BW5000A, Flojet Bottle Water Pumps, Replacement Wands and Parts.
Flojet Bottled Water System; Genuine Flojet bottled water system is ideal where portability and quality is important. Pumps bottle quality water from commercial bottles for better-tasting hot and cold beverages. The new 5000 Series Bottled Water System is designed to work with coffee/tea makers, refrigerator ice and water dispensers, espresso carts and portable sinks or any use requiring portable, potable water. The 5000 Series Bottled Water System is also designed for convenience. The pump automatically shuts off when the water source is depleted and restarts when water is replenished. Its compact size supports easy mounting.
Model No.: BW5000 Series
Illuminated On/Off Switch Provides clear visibility in dark cabinets or hard to reach places
Long Life Motor Ensures years of reliable operation.
Flojet Diaphragm Pump Provides dependable run dry capabilities, extending the life of the pump.
Quick Disconnect Ports Allows for easy wand replacement in seconds.
Quiet Operation Equipped with noise dampening rubber feet to minimize noise pollution.
Thermal Protection Prevents overheating, protecting the pump and control box from damage.
Includes electrical cord with molded 110 plug
20 ft., 1/4" o.d. White Poly Tubing
Flow Rate 1.0 GPM
Demand Pump shuts off when no demand
Wand Float automatically stops the pump when bottle is empty
Scroll down to bottom of page for more Information & Downloadable Spec Sheets
Click the part # below to view the applicable image
14 Day ETA for Out of Stock/Non-Stock Items in this Category
BWP's & Parts
More About Bottled Water Pumps: Flojet BW4000A Manual Flojet BW4000A Bottled Water Pump Spec Sheet Flojet BW5000A Manual The new, next generation Bottled Water pump, Flojet BW5000A, is now the most reliable, affordable and compact system available on the market. Ideal for dispensing drinking bottled water to the refrigerator ice maker / door tap, coffee brewer, espresso coffee cart or drinking water faucets. The Bottled Water Pump was designed to pump purified water from a commercially available 5-gallon purified water bottle. The Bottled Water Pump will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator for the ice maker and chilled drinking water tap, and to certain commercial coffee / tea brewers. When the suction wand is inserted into the standard 5-gallon bottle, it will activate the float switch on the end of the wand and turn the pump on. This same float switch shuts off the pump when the bottle is empty. The wand has a built in back-flow preventer valve that prevents water in the system from flowing back into the bottle, or spilling while changing bottles. The heart of the Bottled water pump is the pump module that automatically adjusts the flow and pressure to fill an appliance or faucet, and stops automatically. The pump is equipped with an automatic thermal cut-off device for additional protection.
Maintenance and Sanitation: Select a cabinet large enough to accommodate the 5 gallon (19L) bottle and suction wand assembly. Place the pump module on the floor of the cabinet with on/off switch and suction tube facing out toward the cabinet doors. Position as close as possible to a grounded electrical outlet and place the five gallon bottle close to the Bottled Water Pump Module without kinking the suction hose. The pump may also be placed in a pantry, closet, cellar or other location where a grounded electrical outlet is available.
Warning: Some Products listed on www.installationpartssupply,com can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
Some of the products, may or may not meet AB1953 for lead content.
It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation. With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.
*Local Will Call Hours: 9:00am - 3:00pm Pacific *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE. We will pull your order and have it ready for you to pick-up within Will Call hours.
Please allow at least 1 (one) hour to process your order after it has been placed prior to will call. (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.