PUMPS & PARTS
Flojet Pumps & Accessories
Air/Gas Powered Pumps | G, K & T Series
K56 Water Boost System w/G60 Pumps
1/2x1/2x1/4 Flojet Water Booster with G60 Pump & 1/2 Gallon Tank & Port Fittings Kit
Quantity in Basket:
Description: 1/2x1/2x1/4 Flojet Water Booster with G60 Pump & 1/2 Gallon Tank & Port Fittings Kit
1/2x1/2x1/4 Flojet Water Booster with G60 Pump, 1/2 Gallon Tank, & Port Fittings Kit with 3/8 & 1/2 St. & 90° Elbow Fittings
Out of Stock
More About FloJet K56-1030 Water Booster System:
CLICK HERE FOR TO VIEW INSTALLATION AND OPERATION SHEET
CLICK HERE FOR TO VIEW SPEC AND INFO SHEET
Water Boosting can be necessary either in areas of poor water pressure or where there can be many machines demanding water and therefore water
pressure can fluctuate. If water pressure does fluctuate it can affect the drink BRIX value and therefore can directly affect taste. Flojet water
booster systems provide consistent pressure up to 150 PSI (10 Bar).
Water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 4 GPM (15 L /min). Note: If pumping over 1.7GPM (6.4 L /min), a pulsation dampener or accumulator tank should be utilized to reduce pulsation, due to momentary shifts in flow requirements.
Capable of CO2 inlet pressures, up to 90 psi (6.2 bar)
Ultimate performance and reliability, with extended service life
Easy installation with quick disconnect ports
Flojets K56-1030 Water Booster System Supplies consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators and ice machines.
Supplies up to 4 GPM (15 L /min). For use when water requirement is over 1.7 GPM (6.4 L/min).
Half-gallon (1.9 l) accumulator tank maintains constant flow requirements.
Capable of CO2 inlet pressures up to 90 psi (6.2 bar).
Ultimate performance and reliability, with extended service life.
Quiet operation with exhaust muffler.
Easy installation with all quick disconnect ports.
Contact us for high volume quotes firstname.lastname@example.org