Cart Total: $0
View Cart | Checkout

Home > BEER, WINE & KEG EQUIPMENT > Beer & Wine Dispensing Stuff > Beer Pumps | Flojet & Shurflo > G56 BeerJet Pump

1/2"x1/2"x1/4" Barb Gas In, 5 GPM Water Booster Pump, CO2 Driven 60-1212I


1/2 Quantity in Basket: None
Code: G60-1212I
Price: $69.88
Description: 1/2"x1/2"x1/4" Barb Gas In, 5 GPM Water Booster Pump, CO2 Driven 60-1212I
1/2"x1/2"x1/4" Barb Gas In, 5 GPM Water Booster Pump, CO2 Driven G60-1212I
Out of Stock
Model; G60-1212I
Water Boosting can be necessary either in areas of poor water pressure or where there can be many machines demanding water and therefore water pressure can fluctuate. If water pressure does fluctuate it can affect the drink BRIX value and therefore can directly affect taste. Flojet water booster systems provide consistent pressure up to 150 PSI (10 Bar).
Water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 4 GPM (15 L /min). Note: If pumping over 1.7GPM (6.4 L /min), a pulsation dampener or accumulator tank should be utilized to reduce pulsation, due to momentary shifts in flow requirements.
Special Features
  • Capable of CO2 inlet pressures, up to 90 psi (6.2 bar)
  • Ultimate performance and reliability, with extended service life
  • Quiet operation
  • Easy installation with quick disconnect ports
    Basic Specs;
  • Inlet; 1/2” (9.52 mm) Barbed Straight Plastic (Polypropylene)
  • Outlet: 1/2” (9.52 mm) Barbed Straight Plastic (Polypropylene)
  • Gas Inlet; 1/4" (6.35 mm) CO2 Shutoff Brass
  • Design; Positive Displacement, Double Diaphragm
  • Power Source; CO2 Gas, Nitrogen or Compressed Dry Filtered Air
  • Construction; Polypropylene, Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
  • Limits; 34˚ to 120˚ F (1.1˚ to 49˚ C)
  • Weight; 1.24 lb (0.56 kg)
  • Dimms; 5.27" x 3.21" x 4.58"(133.8 mm x 81.5 mm x 116.3 mm)
  • Displacement; 3.2 oz. per cycle
  • Self Priming; Up to 10 ft.(3.05 m)
  • Operating Pressure; 20 psi (1.4 bar) min. / 90 psi (6.2 bar) max.
  • Liquid Inlet Pressure; 30 psi(2.1 bar) max.
  • Flow Rate; 5 GPM (18.9 LPM) - Open Flow
  • Contact us for high volume quotes

    IPS is Closed for Business Thanksgiving Week takes orders 24/7 and will be processed in the order received for immediate shipping
    Follow Installation Parts® on:

    Terms & Conditions | Privacy Policy | Email | Contact IPS
    Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
    Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
    Bottle Water Pumps | Beer Equipment | Electrical Hardware

    TOP OF PAGE | HOME | Google

    © 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
    IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.

    Warning: Some Products listed on www.installationpartssupply,com can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit
    Some of the products, may or may not meet AB1953 for lead content.
    It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
    IPS is a distributor, not a manufacturer and IPS-Installation Parts and its principles shall be held harmless of any and all damages including but not limited to:
    legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
    Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
    With purchase, The Customer agrees to all terms and conditions as outlined here and on® Terms and Conditions.

    Credit Cards
    PCI Compliance

    *Local Will Call Hours: 9:00am - 3:00pm Pacific
    We will pull your order and have it ready for you to pick-up within Will Call hours.
    Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
    (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
    All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
    Switch to Mobile