Cart Total: $0
View Cart | Checkout
    https://installationpartssupply.com/mm5/merchant.mvc?

     HOME > FITTINGS & VALVES Here > Watts & Sea Tech Fittings | LF47 & 35 Series Quick Connect

Watts & Sea Tech Fittings | LF47 & 35 Series Quick Connect


Watts & Sea Tech Fittings

Everybody Loves our Fittings Selection Watts SeaTech CTS Fittings
SeaTech a WATTS CompanyWATTS Company
Watts & SeaTech Ball Valves Watts & SeaTech Ball Valves Watts & SeaTech MPT Connectors
Watts & SeaTech Elbow Unions Watts & SeaTech Tees Watts & SeaTech Unions
Push Fittings Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Code Approved For Behind Wall Without Access & Direct In Ground Burial Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Replacement For Qest & Flare It Type Fittings. Watts Quick-Connect Series LF47 fittings are designed and manufactured to be trouble free for many years of service. All Series LF47 fittings are tested, approved and certified to NSF/ANSI 61, CSA B137.5, ASTM F877 and ASSE 1061. Series LF47 fittings are available in standard imperial inch sizes. The unique design of Series LF47 fittings allows for quick and easy connections without installation tools. Watts Quick-Connect Series LF47 fittings are designed for potable water systems.
For other applications please refer to WATTS Technical Service Department.
Tubing should be supported at minimum of 36" to prevent excessive load to the connectors. Do not install tubing supports closer than 3 inches from the connector ends. We strongly recommend that new installations be thoroughly tested prior to use. Do not use with explosive gases, petroleum products, or other fuels. Watts recommends that all fittings and parts be stored in their original packaging until installation to protect the fitting internals from dirt and debris that may cause damage to the o-ring and the o-ring guide. It is also recommended that all threaded connections be made with Teflon tape only. Failure to follow these instructions will void the warranty and possibly result in leaks and water damage. All Series LF47 Fittings come complete with a removable push ring clip to prevent accidental release of the fitting prior to pressurization.
Material Specifications Series LF47
  • Body: Lead Free* Brass Alloy
  • O-Ring: EPDM
  • Gripper Ring: Stainless Steel
  • Push Ring: Delrin
  • Tube Liner: Polysulfone
  • Push Ring Clip: Delrin
  • Fitting Performance; Series LF47 200psi @ 200ºF (13.8 bar @ 93° C)

  • Material Specifications Series 35
  • Body: Polysulfone
  • Collet: Nylon
  • O-Ring: EPDM
  • Spacer: Acetal
  • Tube Liner: Polysulfone
  • Collet Clip: Delrin
  • Watts Quick-Connect Series 35 products are designed and manufactured to be trouble free for many years of service life. Series 35 products are designed and manufactured in polysulfone, a high performance thermal plastic material. All Series 35 products are approved and certified to NSF-61-G, NSF 14, CSA B137.5, ASTM F877, and to the Uniform Plumbing Code (U.P. Code) and ASSE 1061. Series 35 products are available in standard imperial inch sizes. The Watts Quick-Connect design allows for quick and easy connections without installation tools. Simply cut the plastic,copper or CPVC tubing and snap a Watts Quick-Connect fitting in place for a zero leak connection. Watts Quick-Connect Series 35 fittings are designed for potable water systems. For other applications please refer to WATTS Technical Service Department. Tubing should be supported at minimum of 36" to prevent excessive load to the connectors. Do not install tubing supports closer than 3 inches from the connector ends. We strongly recommend that new installations be thoroughly tested prior to use. Do not use with explosive gases, petroleum products, or other fuels.
    CAUTION!!
    The polysulfone material used in the Quick-Connect fittings can be compromised by exposure to volatile organic compounds (VOC’s) and caustic chemicals. Therefore, DO NOT expose this product to any such chemical or foreign substance, which would include exposure to the following products: Pipe Dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation). Watts recommends that all fittings and parts be stored in their original packaging until installation to protect the fitting internals from dirt and debris that may cause damage to the o-ring and the o-ring guide. It is also recommended that all threaded connections be made with Teflon tape only. Failure to follow these instructions will void the warranty and possibly result in leaks and water damage.
  • Fitting Performance Series 35 100psi @ 180ºF 250psi @ 75ºF
  • 6.8 bar @ 82ºC 17.25 bar @ 24ºC
  • Thread Torque Values

  • Size Min. Torque Values Max. Torque Values
    1⁄2"   17.7 in - lbs.           26.5 in - lbs.
    3⁄4"   22.7 in - lbs.           31 in - lbs.
    IPS is Closed Christmas Eve through the New Year
    ips247.com takes orders 24/7 and will be processed in the order received for immediate shipping On Jan 2, 2019
    Follow Installation Parts Supply.com® on:

    Terms & Conditions | Privacy Policy | Email | Contact IPS
    Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
    Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
    Bottle Water Pumps | Beer Equipment | Electrical Hardware

    TOP OF PAGE | HOME | Google

    © 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
    ALL COPYRIGHTS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE COMPANY(S).
    IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.

    Warning: Some Products listed on www.installationpartssupply,com can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
    Some of the products, may or may not meet AB1953 for lead content.
    It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
    IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
    legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
    Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
    With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.

    Credit Cards
    PCI Compliance


    *Local Will Call Hours: 9:00am - 3:00pm Pacific
    *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE.
    We will pull your order and have it ready for you to pick-up within Will Call hours.
    Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
    (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
    All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
    Switch to Mobile