Watts Quick-Connect Series LF47 fittings are designed and manufactured to be trouble free for many years of service. All Series LF47 fittings are tested,
approved and certified to NSF/ANSI 61, CSA B137.5, ASTM F877 and ASSE 1061. Series LF47 fittings are available in standard imperial inch sizes. The
unique design of Series LF47 fittings allows for quick and easy connections without installation tools.
Watts Quick-Connect Series LF47 fittings are designed for potable water systems.
For other applications please refer to WATTS Technical Service Department.
Tubing should be supported at minimum of 36" to prevent excessive load to the connectors. Do not install tubing supports closer than 3 inches from the
connector ends. WATTS strongly recommend that new installations be thoroughly tested prior to use. Do not use with explosive gases, petroleum products, or
Material Specifications Series LF47
Body: Lead Free* Brass Alloy
Gripper Ring: Stainless Steel
Push Ring: Delrin
Tube Liner: Polysulfone
Push Ring Clip: Delrin
Fitting Performance; Series LF47 200psi @ 200ºF (13.8 bar @ 93° C)
Click the part # in the list below for image, info and a closer look
Scroll for more Info on series 35 and LF47, Specs & Related Items.
14-21 Day ETA for Out of Stock/Non-Stock Items in this Category
CTS x MPT
Other LF47 Models Available:
Watts Quick-Connect Series 35 products are designed and manufactured to be trouble free for many years of service life. Series 35 products are designed and manufactured in polysulfone, a high performance thermal
plastic material. All Series 35 products are approved and certified to NSF-61-G, NSF 14, CSA B137.5, ASTM F877, and to the Uniform Plumbing Code (U.P. Code) and ASSE 1061. Series 35 products are available in
standard imperial inch sizes. The Watts Quick-Connect design allows for quick and easy connections without installation tools. Simply cut the plastic,copper or CPVC tubing and snap a Watts Quick-Connect fitting in place for a zero leak connection. Watts Quick-Connect Series 35 fittings are designed for potable water systems. For other applications please refer to WATTS Technical Service Department. Tubing should be supported at minimum of 36" to prevent excessive load to the connectors. Do not install tubing supports closer than 3 inches from the connector ends. We strongly recommend that new installations
be thoroughly tested prior to use. Do not use with explosive gases, petroleum products, or other fuels.
Quick-Connect male connectors 35 Series Available Sizes: - polysulfone.
3501B-0806 - 3/8 in. CTS x 3/8 in. MPT 3501B-1006 - 1/2 in. CTS x 3/8 in. MPT 3501B-0808 - 3/8 in. CTS x 1/2 in. MPT
3501B-1008 - 1/2 in. CTS x 1/2 in. MPT
3501B-1012 - 1/2 in. CTS x 3/4 in. MPT
3501B-1014 - 1/2 in. CTS x 3/4 in. MGHT
3501B-1412 - 3/4 in. CTS x 3/4 in. MPT
3501B-1816 - 1 in. CTS x 1 in. MPT
IPS is Closed for Business Thanksgiving Week ips247.com takes orders 24/7 and will be processed in the order received for immediate shipping
Warning: Some Products listed on www.installationpartssupply,com can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
Some of the products, may or may not meet AB1953 for lead content.
It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation. With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.
*Local Will Call Hours: 9:00am - 3:00pm Pacific *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE. We will pull your order and have it ready for you to pick-up within Will Call hours.
Please allow at least 1 (one) hour to process your order after it has been placed prior to will call. (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.