Cart Total: $0
View Cart | Checkout
    https://installationpartssupply.com/mm5/merchant.mvc?

     HOME > WATERBLOCK | Eltek/Pentair

WATERBLOCK | Eltek/Pentair


WaterBlock | Eltek/Pentair EV9503-05 Water Block Device at wholesale Prices helps to prevent flooding

  • Dimensions; 3/4" threaded female x Male GHT connection(North America GHT)
  • Pressure Requirements; 10 - 125 PSI (0.7 - 8.6 bar)
  • Ambient Temperature; 35° - 140°F (2 - 60°C)
  • Fluid Temperature; 35° - 158°F (2 - 70°C)
  • Flow Rate; 0.53 - 7.9 GPM (2 - 30 Lpm)
  • Resistance to Bursting 725.19 PSI at 77˚F (>50 bar at 25˚C)
  • Related Lifespan79,000 gal (300,000 L)
  • Scroll down to bottom of page for more Information Spec Sheet and Settings Guide
  • Please Contact us for high volume quotes
  • Click the part # below for specific image and a closer look
  • Please click here → for Water Block Info or any additional queries or try using our online chat/messenger at the right bottom corner of the page.
Part # WATERBLOCK | Eltek/Pentair
Stock
Price
Qty
EV9503-05 Water Block Device 3/4 GHT FxM Eltek
Out of Stock  
$36.91
EV9503-20 Water Block Reset Device Eltek Pentair
Out of Stock  
$20.93
EV3138-61 Water Block Adapter 3/4 MGHT Hex Nipple
Out of Stock  
$1.21
FC2W 2" Water Block, Filter & Membrane Base Mounting Clip-White
In Stock  
$0.95

Part #: Description: Price: Qty:
310-12 3/4x1/8 Brass Garden Hose Cap With FPT Tap $1.28
201A-4A 1/4"x1/8" Barb x MPT Connector Brass $0.46
G68-4A 1/4"x1/8" Tube x MPT Connector-John Guest $0.95
GNC2258 3/4x3/8 Female GHT x JG Brass Connector $8.47

Overflow safety device controls the maximum consumption of water between 1.3 and 13.2 gallons (4.9 and 49.97 L). Device measures the number of gallons of water that have passed through it; if this quantity exceeds the set value, the Eltek Water Block stops the flow and maintains this safety condition until user intervention. If the water volume does not exceed the set value, the Eltek Water Block mechanically and automatically resets the measured volume and is ready to restart a new measurement cycle. No external energy source required, water simply flows through device. Resistant to chlorine and chloramines damage.

APPLICATIONS
  • Coffee Brewers
  • Espresso Machines
  • Iced Tea Machines
  • Small Ice Machines
  • Boiler Steam
  • Point-of-Use (POU) Coolers
  • Undercounter Chillers
  • Undercounter Instant Hot Water Heaters
  • Vending Machines
  • Note: not recommended for use prior to reverse osmosis systems or with Flaker/Nugget ice machines.

  • INSTALLATION TIPS
  • Vertical assembly preferred
  • Not recommended for reverse osmosis (RO) installation as an RO system by nature can produce permeate water for long periods of time which will unnecessarily trip the Water Block.
  • Use of the optional Water Block External Reset Device (EV9503-20) is recommended. Internal reset can be used instead, however, this does require disconnecting the water line.
  • Use of an optional EV3138-61 GHT Adapter (not shown) is recommended for installation with garden hose type (GHT)connectors.
  • Optional clip (part number EV3118-40) can be used for mounting during installation

  • OPERATION TIPS
  • Maximum volume established by 10 setting notches.
  • Every notch increases the set volume by 1.5 +/- gallons (5 +/- liters).

  • CLICK THE LINKS BELOW FOR SPECS/ APPLICATIONS AND SETTINGS GUIDE
    Water Block Spec / Application Sheet
    Water Block Settings Guide
    Follow Installation Parts Supply.com® on:

    Terms & Conditions | Privacy Policy | Email | Contact IPS
    Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
    Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
    Bottle Water Pumps | Beer Equipment | Electrical Hardware

    TOP OF PAGE | HOME | Google

    © 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
    ALL COPYRIGHTS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE COMPANY(S).
    IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.


    Some of the products listed on InstallationPartsSupply.com® may contain chemicals
    known to the State of California, Vermont and other states to cause cancer, birth defects or other reproductive harm.
    Some of the products, may or may not meet AB1953 for lead content.
    It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
    IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
    legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
    Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
    With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.


    Credit Cards
    PCI Compliance


    *Local Will Call Hours: 9:00am - 3:00pm Pacific
    *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE.
    We will pull your order and have it ready for you to pick-up within Will Call hours.
    Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
    (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
    All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
    Switch to Mobile