More About Omnipure Water Filters;
The Omnipure CL-Series Inline Water Filter
Though the basic configuration of the CL-Series hasn’t changed in over 30 years, it incorporates the design innovations that have made OMNIPURE the leader in the inline filtration industry. Customers have come to rely upon this simple but dependable inline filter for a variety of used including ice machines, water coolers, drinking fountains, as was as under-the-sink applications and as components in reverse osmosis systems. You will find a use for this filter in virtually any situation where better tasting water is important.
Superior engineering and production techniques are the keys to the success of the CL-Series. For instance, each filter utilized a unique spring disc that keeps media under ideal pressure, eliminating channeling and ensuring an equal distance linear path. Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.
The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.
The Omnipure K-Series Inline Water Filter
The success of the K-Series filter is directly attributable to the innovative Quick-Connect ™ fittings that are incorporated into the design. These fittings are unique in two ways. First, they allow for the installation of the inline filter in a matter of seconds. Inlet and outlet tubes are simply snapped into place and secured using a patented collet system. Second, the fittings are molded directly into the filter body and cap as a single unit. This reduces the chance for weeping or seepage. Cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.
One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12” x 2.5” filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.
The K-Series filter is available in 6”, 8”, 10”, 12” or 14” lengths manufactured in 2” or 2.5” diameters. The true benefit is that systems can be designed to incorporate the various lengths and diameters - either all the same size or intermixed-to meet specific filtration needs.
The Omnipure CK-Series/CELF-Series Cuno® Replacement Filters;
The CK-Series was developed to offer our customers an alternative to higher priced replacement bodies designed to fit existing bayonet-style permanent heads. Made of highly durable injection-molded polypropylene, the CK-Series is constructed from 100% NSF (National Sanitation Foundation) approved materials. Omnipure offers a variety of standard media options including granular activated carbon (GAC) for taste and odor reduction, depth filtration media to address sand, grit and sediment problems that can clog or damage down line equipment and a special blend polyphospate media designed to control the scaling associated with hard water.
The CK-Series can also be ordered with the premium Omnipure Block ™ media. This family of carbon blocks utilizes new technology that optimizes surface area for better contaminant absorption. The Omnipure Block™ is available in a high capacity, ten-micron activated carbon version and a water polishing, cysts reducing one-micron version. Additionally, Omnipure Blocks are available in an activated carbon/scale inhibitor version and a carbon/lead inhibitor version.
The CK-Series of replacement bodies from Omnipure...a reliable, efficient, cost-effective alternative to higher priced filter body replacements on the market.
The Omnipure E-Series Everpure Replacement Water Filter:
The new E-Series was designed for our customers that are already using existing permanent heads but would like an alternative to the replacement bodies currently offered.
The main benefit of the E-Series is price to performance value. E-Series filters, with equal or superior filtration capability, are offered at a considerably lower price than comparable replacement bodies on the market.
Omnipure utilizes several media or media combinations to address standard water problems including granular activated carbon (GAC), polypropylene depth filtration, and polyphospate. Omnipure also offers one or ten micron carbon blocks, carbon blocks with lead absorbent material and carbon blocks with scale inhibitors to address specific water conditions.
E-Series replacement bodies are offered in 6”, 8”, 10”, 12”and 14” lengths. Bodies are tested to withstand pressure of 125 psi and temperature of 100º F. Media service life is designed to handle up to 3,000 gallons in some models and filtration micron ratings are as low as 1 micron in other models.
The Omnipure ELF-Series Everpure Replacement Water Filters are the "Extra Large Format":
The ELF-Series of filters from Omnipure was designed specifically for the higher volume requirements for the food service industry. In contrast to what the name implies, the new ELF’s (Extra-Large Format) capacity of up to 20,000 gallons and flow rates of up to 2.0 gal/minutes, make it ideal for use in restaurants, cafes, coffee shops and vending machines.
The ELF-Series is engineered in a two-piece configuration with a permanent head and a bayonet style replaceable polypropylene body. This configuration helps to reduce cost as simple body replacement is cheaper than replacing the entire filter apparatus. Replacement is fast and easy. The body is quickly detached from the head with the twist of a wrist, no tool required.
Omnipure has developed an entire series of carbon blocks to work in the extra large ELF filter body. The Omnipure Blocks™ available in the ELF-Series include standard 10 and 1 micron carbon blocks, lead-specific carbon blocks and polyphosphate/ carbon blocks for equipment protection from contaminants associated with hard water. All Omnipure filter bodies are made with virgin, high-impact polypropylene which is especially ideal for use in applications where sanitary conditions are required. All materials of construction are NSF and/or FDA approved.
The ELF-Series from Omnipure. Cost-effective, point-of-use water filtration for high volume applications.
The Omnipure Q-Series Water Filters:
The Q-Series is the ultimate “user friendly” inline filter on the market. Replacement of the spent media bed is completed, in a matter of seconds, by detaching the filter body from a permanent head with a twist of the wrist. The new filter body is just as easily threaded into the head, and the replacement is then complete. The Q-Series is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. No tools. No drips. No hassles.
As with all Omnipure filters, the Q-Series is ideal for use in any situation where better tasting, sediment-free water is required-beverage equipment, RO systems, drinking fountains, ice machines, and other point-of-use applications. Standard media includes granular activated carbon for taste and odor reduction, polypropylene depth filtration for removal of grit and sediment, and polyphosphate to control lime and scale deposits. Also, a wide variety of specialty and custom media options are available as well as a corresponding RO membrane body for use in reverse osmosis systems. Eliminates taste and odor. Filters out sediment. Protects equipment.
The Q-Series is designed to give our customers a hgh quality, economically priced alternative to similar products on the market. Our engineering and production expertise enables us to offer both the initial unit and the replacement bodies at a significantly lower price than the competition.
The Q-Series is produced with a diameter of 2.5” and lengths of 6”, 8”,10”, 12” and 14”. Quick-Connect 1/4” fittings are available on this series. Female threads are available in 1/4” and 3/8” NPT.
Incorporated into every Omnipure Inline Water Filter body design are engineering features that make Omnipure products the best, most cost-effective water filters on the market. For instance, every filter features a patented spring disc that keeps media under ideal pressure and eliminates channeling, polypropylene inlet and outlet pads prevent media migration that can foul water, and lastly, all Omnipure filter components are friction-welded together to eliminate the use of glues or binders that can contaminate drinking water.
Omnipure Water Filtration Company revolutionized the filtration industry in 1970 when it made the first small, disposable, inline, water filter. The first and still the best and one of the last domestically made water filters in the U.S.