Home > SINK AND FAUCET PARTS > Drain Saddles John Guest, Jaco, FPT > Drain Saddle w\ John Guest Connections
Drain Saddle w\ John Guest Connections
Drain Saddles for Home RO Systems or any situation where waste water needs a place to go. These little gems are used to connect the reject line on point of use RO system to the sink drain P/S Traps. The clamp style body will fit drain pipes up to 1.5” diameter and should be installed between the sink basin and the trap. It works by drilling a hole into the basin drain tube and placing the gasket in the saddle and tightened in place. The tube is then inserted and nut secured if not a push connect style.
- Multiple applications
- R.O., Laboratory, Potable Water, Hydroponics, and Beverage Applications
- Teflon Tape Should Be Used on all NPT Fittings
- Click the part # in the list below for image, info and a closer look
- Scroll for more Info, Specs & Related Items.
- 5 Day ETA for Out of Stock/Non-Stock Items in this Category
Products (Total Items: 2)
Drain Saddles for Home RO Systems or any situation where waste water needs a place to go. These little gems are used to connect the reject line on point of use RO system to the sink drain P/S Traps. The clamp style body will fit drain pipes up to 1.5” diameter and should be installed between the sink basin and the trap. It works by drilling a hole into the basin drain tube and placing the gasket in the saddle and tightened in place. The tube is then inserted and nut secured if not a push connect style.