Cart Total: $0
View Cart | Checkout
    https://installationpartssupply.com/mm5/merchant.mvc?

     HOME > PUMPS & PARTS > Flojet Pumps & Accessories > Air/Gas Powered Pumps | G, K & T Series > K56 Water Boost System w/G60 Pumps

K56 Water Boost System w/G60 Pumps


Flojet K561030A Water Boost System w/ G60 Pump and Tank

Flojets K56-1030 Water Booster System Supplies consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators and ice machines. Supplies up to 4 GPM (15 L /min). For use when water requirement is over 1.7 GPM (6.4 L/min).
  • Half-gallon (1.9 l) accumulator tank maintains constant flow requirements.
  • Capable of CO2 inlet pressures up to 90 psi (6.2 bar).
  • Ultimate performance and reliability, with extended service life.
  • Quiet operation with exhaust muffler.
  • Easy installation with all quick disconnect ports.
  • Scroll down to bottom of page for more Information and Specs as well as .pdf's
  • Contact us for high volume quotes sales@ips247.com
  • Click the part # below for specific info and a closer look
  • Part # K56 Water Boost System w/G60 Pumps
    Stock
    Price
    Qty
    K561030A 1/2x1/2x1/4 Flojet Water Booster with G60 Pump, 1/2 Gallon Tank, & Port Fittings Kit with 3/8 & 1/2 St. & 90° Elbow Fittings
    Out of Stock  
    $251.92

    Related Products:

    Part #: Description: Price: Qty:
    20381-024 3/8"-1/2" Barb 90° Liquid Port Fitting for G56/K56 Flojet Pump 203810024 $1.13

    More About FloJet K56-1030 Water Booster System:
  • CLICK HERE FOR TO VIEW INSTALLATION AND OPERATION SHEET
  • CLICK HERE FOR TO VIEW SPEC AND INFO SHEET

  • Water Boosting can be necessary either in areas of poor water pressure or where there can be many machines demanding water and therefore water pressure can fluctuate. If water pressure does fluctuate it can affect the drink BRIX value and therefore can directly affect taste. Flojet water booster systems provide consistent pressure up to 150 PSI (10 Bar).
    Water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 4 GPM (15 L /min). Note: If pumping over 1.7GPM (6.4 L /min), a pulsation dampener or accumulator tank should be utilized to reduce pulsation, due to momentary shifts in flow requirements.
    Special Features
  • Capable of CO2 inlet pressures, up to 90 psi (6.2 bar)
  • Ultimate performance and reliability, with extended service life
  • Quiet operation
  • Easy installation with quick disconnect ports Flojets K56-1030 Water Booster System Supplies consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators and ice machines. Supplies up to 4 GPM (15 L /min). For use when water requirement is over 1.7 GPM (6.4 L/min).
  • Half-gallon (1.9 l) accumulator tank maintains constant flow requirements.
  • Capable of CO2 inlet pressures up to 90 psi (6.2 bar).
  • Ultimate performance and reliability, with extended service life.
  • Quiet operation with exhaust muffler.
  • Easy installation with all quick disconnect ports.
  • Contact us for high volume quotes sales@ips247.com
  • Follow Installation Parts Supply.com® on:

    Terms & Conditions | Privacy Policy | Email | Contact IPS
    Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
    Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
    Bottle Water Pumps | Beer Equipment | Electrical Hardware

    TOP OF PAGE | HOME | Google

    © 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
    ALL COPYRIGHTS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE COMPANY(S).
    IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.


    Some of the products listed on InstallationPartsSupply.com® may contain chemicals
    known to the State of California, Vermont and other states to cause cancer, birth defects or other reproductive harm.
    Some of the products, may or may not meet AB1953 for lead content.
    It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
    IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
    legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
    Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
    With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.


    Credit Cards
    PCI Compliance


    *Local Will Call Hours: 9:00am - 3:00pm Pacific
    *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE.
    We will pull your order and have it ready for you to pick-up within Will Call hours.
    Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
    (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
    All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
    Switch to Mobile