Cart Total: $0
View Cart | Checkout
    https://installationpartssupply.com/mm5/merchant.mvc?

     HOME > GAS BLENDERS | MCDANTIM

GAS BLENDERS | MCDANTIM


McDantim Trumix Gas Blenders, TM100, TM200

McDantim Trumix Gas Blenders
Get exactly the gas blend you need by spending less time changing bottles. Simply hang on the wall and connect the gas lines. These Gas Blenders Can be used with any source of clean Nitrogen (N2) and CO2, including high pressure cylinders, bulk tanks, or separators. Non-corrosive housing. Warranty: 2 Years. Order your gas blending system to deliver your desired mix of nitrogen and co2 to your beverage system. Panel comes with 1/4" female pipe threads; Order 1/4", 5/16" or 3/8" barbs in related items below.
    Trumix 60/40 Gas Blending Panel Features;
  • On-site accurate gas blending.
  • More cost-effective than pre-mixed cylinders.
  • Easy to install and extremely dependable
  • Standard Flow: Up to 30 kegs/hr. (15 kegs/hr. per blend) dispensed.
  • Requires no electricity, on-going maintenance or adjustment
  • Lager Blend: 60% CO2 & 40% Nitrogen
  • Stout Blend: 25% CO2 & 75% Nitrogen
  • Standard System in Stock is 60% CO2 / 40% N2

  • Pressures;
  • Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.
  • Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure.
  • Log In For Your Wholesale / Volume Price or Contact IPS For Volume Quotes & Other Options Click Here! sales@ips247.com
  • Click the part # in the list below for image, info and a closer look
  • Scroll down for more Info, Specs & related items.
  • 7-10 Day ETA for Out of Stock/Non-Stock Items in this Category
Part # GAS BLENDERS | MCDANTIM
Stock
Price
Qty
TM100 Trumix 100 Gas Blender 60/40 Single
In Stock  
$643.50
TM200 Trumix 200 Gas Blender 60/40 Double
Out of Stock  
$864.50

Related Items;

Part #: Description: Price: Qty:
201A-4B 1/4"x1/4" Barb x MPT Connector Brass $0.63
201A-5B 5/16"x1/4" Barb x MPT Connector Brass $0.63
201A-6B 3/8"x1/4" Barb x MPT Connector Brass $0.71
742HPN Primary Beer N2 Regulator, N2, 1P1P, CGA580 Inlet, 5/16" Barb Shut-off w/Duckbill Check, 60#&3000# G $59.88
13-3 10.8-13.3 / .425-.524 1-Ear Stepless Oetiker Clamp Group 167 (16700010) $0.15
15-7 13.2-15.7 / .520-.618 1-Ear Stepless Oetiker Clamp Group 167 (16700016) $0.15
17-0 14.5-17.0 / .571-.669 1-Ear Stepless Oetiker Clamp Group 167 (16700017) $0.15
TT5-M 1/2"x520" MilSpec T-27730A Teflon Tape-Malaysia ...the Best! $0.99

Get exactly the gas blend you need by spending less time changing bottles. Simply hang on the wall and connect the gas lines. These Gas Blenders Can be used with any source of clean Nitrogen (N2) and CO2, including high pressure cylinders, bulk tanks, or separators. Non-corrosive housing. Warranty: 2 Years. Order your gas blending system to deliver your desired mix of nitrogen and co2 to your beverage system. Panel comes with 1/4" Female Pipe Threads; Order 1/4", 5/16" or 3/8" barbs in related items above.
    Trumix 60/40 Gas Blending Panel Features;
  • On-site accurate gas blending.
  • More cost-effective than pre-mixed cylinders.
  • Easy to install and extremely dependable
  • Standard Flow: Up to 30 kegs/hr. (15 kegs/hr. per blend) dispensed.
  • Requires no electricity, on-going maintenance or adjustment
  • Lager Blend: 60% CO2 & 40% Nitrogen
  • Stout Blend: 25% CO2 & 75% Nitrogen
  • Standard System in Stock is 60% CO2 / 40% N2

  • Pressures;
  • Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.
  • Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure.
  • Log In For Your Wholesale / Volume Price or Contact IPS For Volume Quotes & Other Options Click Here! sales@ips247.com
  • 7-10 Day ETA for Out of Stock/Non-Stock Items in this Category
Follow Installation Parts Supply.com® on:

Terms & Conditions | Privacy Policy | Email | Contact IPS
Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
Bottle Water Pumps | Beer Equipment | Electrical Hardware

TOP OF PAGE | HOME | Google

© 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
ALL COPYRIGHTS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE COMPANY(S).
IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.


Some of the products listed on InstallationPartsSupply.com® may contain chemicals
known to the State of California, Vermont and other states to cause cancer, birth defects or other reproductive harm.
Some of the products, may or may not meet AB1953 for lead content.
It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.


Credit Cards
PCI Compliance


*Local Will Call Hours: 9:00am - 3:00pm Pacific
*DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE.
We will pull your order and have it ready for you to pick-up within Will Call hours.
Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
(Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
Switch to Mobile