More About Spring Check Valve
Spring Check Valves efficiently perform all of the functions of a swing check or vertical lift check valve and at the
same time operate silently to prevent the effects of water hammer.
Features:
- Conical brass disc for full fluid flow
- PTFE seat
- Install in horizontal or vertical position
- Low pressure drop equivalent to a swing check
- Stainless steel guide rod and spring
- Silent operation
- Threaded ends
|
|
Specifications:
A bronze silent check valve shall be installed as indicated on the plans.
The valve shall have a conical brass disc, PTFE seat and silent operation. Pressure rating no less than 400psi(27.6 bars)
WOG non-shock and 15psi(1 bar) WSP. Valve shall be a Watts Regulator Company Series 600.
Application Notes:
These valves are not suggested for installation in sewage ejector piping.
WARNING: Do not use for reciprocating air compressor service.
