Home > FITTINGS & VALVES > John Guest Fittings & Valves SpeedFit > Female British Pipe Faucet Connector John Guest
Female British Pipe Faucet Connector John Guest
CI321214S Features
- Convert a Male BSPP Faucet Thread to a Quick Connect Tube Fitting
- Push-fit technology
- Quick disconnection without the need for tools
- Food Quality and suitable for potable liquids
- Suitable for soft metal or plastic tubes
- PI Series Suitable for air or inert gases
- Superior flow characteristics
- Scroll down to bottom of page for more Information and Specs or For factory product specifications please refer to the John Guest Web Site
- Click the part # below for specific info and a closer look
Products (Total Items: 2)
For current factory product specifications please refer to the John Guest Web Site
Working Pressure and Temperature Range
Super Speedfit CI and CM fittings are suitable for the following pressures and temperatures.
Also suitable for vacuum
Depending on the tube used, under certain conditions fittings may be used at higher pressures and temperatures. Please refer to John Guest Customer Service Department/website for guidance.
Note: 1 Bar = 14.5 PSIG.
Tube Types:
Plastic Tube - Polyethylene, nylon and polyurethane conforming to the tolerances shown below. For soft tubing or thin wall tube we recommend the use of tube inserts.
Braided Tube - Use of Tube to Hose Stems is essential when using tube. Use of clamps to retain braided tube on barbs is recommended.
Metal Tube (soft) - Brass, copper or mild steel conforming to the tolerances below
Metal Tube (hard) - We do not recommend Super Speedfit fittings for hard metal tubes or chromium plated tubes.
For stainless steel and other polished metal tubes we recommend the use of SuperSeal fittings.
It is essential that outside diameters be free from score marks and that the tube be deburred before inserting the fitting.
Working Pressure and Temperature Range
Super Speedfit CI and CM fittings are suitable for the following pressures and temperatures.
Pressure
Water
+20°C
10 Bar
+65°C intermittent hot water
7 Bar
Also suitable for vacuum
Depending on the tube used, under certain conditions fittings may be used at higher pressures and temperatures. Please refer to John Guest Customer Service Department/website for guidance.
Note: 1 Bar = 14.5 PSIG.
Tube Types:
Plastic Tube - Polyethylene, nylon and polyurethane conforming to the tolerances shown below. For soft tubing or thin wall tube we recommend the use of tube inserts.
Braided Tube - Use of Tube to Hose Stems is essential when using tube. Use of clamps to retain braided tube on barbs is recommended.
Metal Tube (soft) - Brass, copper or mild steel conforming to the tolerances below
Metal Tube (hard) - We do not recommend Super Speedfit fittings for hard metal tubes or chromium plated tubes.
For stainless steel and other polished metal tubes we recommend the use of SuperSeal fittings.
It is essential that outside diameters be free from score marks and that the tube be deburred before inserting the fitting.