Home > WATER FILTERS & SYSTEMS > Cartridges & Housings Blue & Big Blue Style > All Phosphate Scale Inhibitor Cartridges
All Phosphate Scale Inhibitor Cartridges
Omnipure POCB934-16 is a 16 oz. ALL Phosphate scale inhibitor filter cartridge. 9 3/4" x 2.5" universal size filter cartridge aids in the reduction and inhibiting of scale deposits in drinking water. It is used to reduce scale deposits in ice machines, brewers, etc.
- 9 3/4" X 3" DIAMETER Fits Most 10" Housings
- Also Available in Big Blue and other sizes
- 16 oz. ALL Phosphate scale inhibitor
- Potable Water, Ice, Glycol, Beer, Wine and Beverage Applications
- Click the part # in the list below for image, info and a closer look
- Scroll for more Info, Specs & Related Items.
- 14-21 Day ETA for Out of Stock/Non-Stock Items in this Category
Products (Total Items: 1)
Water Filter Calculator
Model POCB Carbon/Phosphate Cartridge
IMPORTANT NOTICE
Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that, before purchasing a water filter unit, you have your water supply tested to determine your actual water treatment needs.
Standard Number 42 Aesthetic Effects
Scale Reduction - 6 Months 4oz. Phosphate
1Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5° C
Operating Specifications
Capacity: 6 Months/3500 Gallons
Flow Rate: 1 - 2.5 GPM (3.78 LPM)
Maximum Pressure: 125 PSIG
Temperature: 35-1006 F (2-386 C)
General Installation/Operation/Maintenance Requirements
The Best Inline Water Filter in the World... Pure and Simple.
Model POCB Carbon/Phosphate Cartridge
IMPORTANT NOTICE
Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that, before purchasing a water filter unit, you have your water supply tested to determine your actual water treatment needs.
Standard Number 42 Aesthetic Effects
Parameter
USEPA
MCL
MCL
Influent
Challenge
Challenge
Effluent
Average
Average
Effluent
Maximum
Maximum
Percent Reduction
Average
Average
Percent Reduction
Minimum
Minimum
Chlorine
-
1.8
<0.1
<0.1
>95
90
Taste & Odor
-
-
-
-
-
-
Scale Reduction - 6 Months 4oz. Phosphate
1Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5° C
Operating Specifications
Capacity: 6 Months/3500 Gallons
Flow Rate: 1 - 2.5 GPM (3.78 LPM)
Maximum Pressure: 125 PSIG
Temperature: 35-1006 F (2-386 C)
General Installation/Operation/Maintenance Requirements
- Note flow direction of filter.
- For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon™ tape before installation. Install Teflon™ taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
- Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
- Replace cartridge when rated capacity (3500 gallons/6 months) is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations.
- The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
The Best Inline Water Filter in the World... Pure and Simple.