More About The Omnipure E-Series and ELF-Series Everpure® Replacement Water Filters;
The E-Series and ELF-Series
are both a replacement filter body engineered with a universal cap, designed to affix to existing permanent heads, including Everpure® Standard Heads for Example. (note; Everpure QL1 Heads are Smaller Diameter, Omnipure suffix is "-SB" for Small Bayonet.) This series offers similar performance to existing replacement filter bodies on the market, but is offered at a much lower price.
The new E-Series and ELF-Series
are designed for our customers that are already using existing Everpure permanent heads but would like an alternative to the replacement bodies currently offered. The E-Series and ELF-Series
also fit Omnipure ELF-Heads ELF-HEAD-DK7 AND ELF-HEAD-DK7-P6.
The main benefit of the E-Series and ELF-Series
is price to performance value. E-Series Water Filters
, with equal or superior filtration capability, are offered at a considerably lower price than comparable replacement bodies on the market.
utilizes several media or media combinations to address standard water problems including Granular Activated Carbon (GAC), Polypropylene Depth Filtration, and Polyphospate. Omnipure also offers one or ten micron Carbon Blocks, Carbon Blocks with Lead Absorbent Material and Carbon Blocks with Scale Inhibitors to address specific water conditions.
replacement bodies are offered in 6”, 8”, 10”, 12”and 14” lengths. Bodies are tested to withstand pressure of 125 psi and temperature of 100º F. Media service life is designed to handle up to 3,000 gallons in some models and filtration micron ratings are as low as 1 micron in other models.
More About The Omnipure ELF-Series;
of filters from Omnipure
was designed specifically for the higher volume requirements for the food service industry. In contrast to what the name implies, the new ELF’s (Extra-Large Format) capacity of up to 20,000 gallons and flow rates of up to 2.0 gal/minutes, make it ideal for use in restaurants, cafes, coffee shops and vending machines.
is engineered in a two-piece configuration with a permanent head and a bayonet style replaceable polypropylene body. This configuration helps to reduce cost as simple body replacement is cheaper than replacing the entire filter apparatus. Replacement is fast and easy. The body is quickly detached from the head with the twist of a wrist, no tool required.
has developed an entire series of carbon blocks to work in the extra large ELF
filter body. The Omnipure Blocks™
available in the ELF-Series
include standard 10 and 1 micron Carbon Blocks, Lead-Specific Carbon Blocks and Polyphosphate / Carbon Blocks for equipment protection from contaminants associated with hard water. All Omnipure
filter bodies are made with virgin, high-impact polypropylene which is especially ideal for use in applications where sanitary conditions are required. All materials of construction are NSF and/or FDA approved.
The ELF-Series from Omnipure.
Cost-effective, point-of-use water filtration for high volume applications.