Cart Total: $0
View Cart | Checkout
    https://installationpartssupply.com/mm5/merchant.mvc?

     HOME > WATTS PRODUCTS > ASSE 1032 Backflow Double Check | Watts SD2

ASSE 1032 Backflow Double Check | Watts SD2


Watts Series SD-2 Backflow Preventer for Carbonated Beverage Machines ASSE 1032 APPROVED

Watts Series SD-2 Backflow Preventer for Carbonated Beverage Machines ASSE 1032 APPROVED
Watts Series SD-2 Backflow Preventer for Carbonated Beverage Machines ASSE 1032 APPROVED, LEAD FREE
  • Maximum Working Pressure: 200psi (13.8 bar)
  • Certified to ANSI/NSF Standard 18, Manual Food and Beverage Dispensing Equipment
  • ASSE 1032 Approved Dual Check
  • 316 stainless steel body for corrosion resistance
  • All rubber compounds comply with FDA food additive regulations
  • Streamlined body design minimizes pressure loss and cavitation
  • Endurance tested for more than 500,000 pumping cycle
  • Shock tested for more than 100,000 pumping cycles
  • All materials in contact with the potable water are in compliance with the requirements of the Safe Drinking Water Act, Public Law 93-523, National Interim Primary Drinking Water Regulations.
  • Click the part # in the list below for image, info and a closer look
  • Scroll down for more Info, Specs & related items.
  • 14 Day ETA for Out of Stock/Non-Stock Items in this Category
  • Part # Flare x Flare
    Stock
    Price
    Qty
    SD2-MF-44 1/4" Flare Dual Check Valve ASSE1032 No Vent
    Watts SD2-MF-44 | 0061651
    Out of Stock  
    $68.88
    SD2-MF-66 3/8" Flare Dual Check Valve ASSE1032 No Vent
    Watts SD2-MF-66 | 0061655
    Out of Stock  
    $43.62

    Related:

    Part #: Description: Price: Qty:
    S21-66 3/8" Barb Stem Stainless Steel for 3/8" Swivel Nut NP50-6/S3178 (3009) $0.86
    NP50-6 3/8" Chrome Swivel Nut for Barb Stems S21-46/S21-66 (1003) $0.44
    S30-66 3/8"x3/8" Barb x Female Flare Swivel Elbow 90° Radius, Stainless Steel $3.19
    NY6 3/8" Flare Gaskets aka Fish-eyes Black Nylon $0.11
    BT6-BLUE 3/8"(.380x.593)x300 ft Beverage Tubing Blue Trace 172-06320-00 $106.97
    12-3 9.8-12.3 / .386-.484 1-Ear Stepless Oetiker Clamp Group 167 (16700009) $0.18
    14100387 Side Jaw Compound Action Oetiker HIP2800E Plier Pincers $25.53

    www.watts.com/pages/_products_details
    Series SD-2 Dual Check Valves for Carbonated Beverage Machines prevent the reverse flow of contaminated water, such as carbon dioxide gas and carbonated water, from entering into the potable water supply due to backpressure backflow. It consists of a stainless steel body construction with internal rubber components and is designed for continuous or intermittent pressure applications. Series SD-2 is ideal for use on post-mix carbonated beverage equipment and dispensing equipment for tea and coffee.
    Maximum Working Pressure: 200psi (13.8 bar).

    Features:

    • Certified to ANSI/NSF Standard 18, Manual Food and Beverage Dispensing Equipment
    • ASSE 1032 Approved Dual Check
    • 316 stainless steel body for corrosion resistance
    • All rubber compounds comply with FDA food additive regulations
    • Streamlined body design minimizes pressure loss and cavitation
    • Endurance tested for more than 500,000 pumping cycle
    • Shock tested for more than 100,000 pumping cycles
    • All materials in contact with the potable water are in compliance with the requirements of the Safe Drinking Water Act, Public Law 93-523, National Interim Primary Drinking Water Regulations.
    Follow Installation Parts Supply.com® on:

    Terms & Conditions | Privacy Policy | Email | Contact IPS
    Pumps | Water Filters | Pressure Regulators | Backflow Preventers | Carbonators | Cold Plates | Dispensers
    Taprite CO2 Regulators | Oetiker Clamps | Tubing & Hose | Brass Fittings | Stainless Fittings | John Guest Fittings
    Bottle Water Pumps | Beer Equipment | Electrical Hardware

    TOP OF PAGE | HOME | Google

    © 2016 INSTALLATION PARTS SUPPLY® All Rights Reserved.
    ALL COPYRIGHTS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE COMPANY(S).
    IPS claims no ownership or rights of listed Logo's, Names or Products other than; IPS, its Company Logo, and INSTALLATIONPARTSSUPPLY.COM®.


    Some of the products listed on InstallationPartsSupply.com® may contain chemicals
    known to the State of California, Vermont and other states to cause cancer, birth defects or other reproductive harm.
    Some of the products, may or may not meet AB1953 for lead content.
    It is the customers/buyers and ultimately the user/installers responsibility to be aware of and know all laws pertaining to the use of specific products such as Backflow Preventers
    IPS is a distributor, not a manufacturer and IPS-Installation Parts Supply.com and its principles shall be held harmless of any and all damages including but not limited to:
    legal action for misuse, physical, property, water damage or otherwise for any reason. Purchaser/user/installer claims, bears and holds all responsibility.
    Some Images are for illustration only and are subject to change according to current inventory and/or Factory Production. Prices subject to change with market fluctuation.
    With purchase, The Customer agrees to all terms and conditions as outlined here and on IPS247.com® Terms and Conditions.


    Credit Cards
    PCI Compliance


    *Local Will Call Hours: 9:00am - 3:00pm Pacific
    *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE.
    We will pull your order and have it ready for you to pick-up within Will Call hours.
    Please allow at least 1 (one) hour to process your order after it has been placed prior to will call.
    (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
    All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.
    Switch to Mobile