Click the part # below for specific image, info and a closer look
Scroll down to bottom of page for more Info and Specs
2-4 Week ETA for Out of Stock/Non-Stock Items in this Category
8000 SERIES PRIMARY SODA REGULATORS
Primary Soda Regulator, 2P2P, 1/4" Flare Inlet w/6' Hose (CGA320), 1/4" Flare Outlets w/Check, 100lb, 160lb, and 2000lb Gauges, Red and Gold Caps
The 8000 Series is similar to the 5740 Series of Primary Regulators (for direct cylinder mount) and have a non-adjustable safety built into the body of the regulator where it cannot be removed or easily circumvented. In the event of a failure of the regulator seat, this safety will respond instantaneously protecting anything downstream from potentially dangerous high pressure. The maximum down stream pressure the system will see will not exceed 143 psig in accordance with NSDA guidelines.
8000 Series For Commercial, High Volume
Polycarbonate bonnet will not chip, break or fade
High CO2 volumetric flow provides continuity in product dispensing
Primary regulators connect directly to gas source
Recommended operating pressure be limited to 2/3 of the gauge range for maximum accuracy
UL approved per UL252 class IV rating for CO2
Both Primary and Secondary regulators can accept CO2 tank pressure
10 Micron filter built in to keep contaminants out of regulator
Used primarily for Soda and Beer but can be used for other applications.
*Local Will Call Hours: 9:00am - 3:00pm Pacific *DUE TO INSURANCE PURPOSES, LOCAL WILL CALL ORDERS MUST BE PLACED VIA THE WEBSITE. We will pull your order and have it ready for you to pick-up within Will Call hours.
Please allow at least 1 (one) hour to process your order after it has been placed prior to will call. (Select "Local Will Call" when prompted to choose a Shipping Method; Email IPS if this option is not available)
All Will Calls/Pick Ups and Deliveries are at the "Man Door" on Side of Building @ Shipping Department.