Home > CO2 & N2 REGULATORS > Beer Co2 & N2 Regulators-All Series > Primary Co2 & N2 Regulators Beer > 742 Series Nitrogen (N2) Primary Regulators
742 Series Nitrogen (N2) Primary Regulators
More About Nitrogen (N2) Zinc Bonnet Regulators
- Nitrogen is widely used in the beer industry but also has been used for dispensing wine and is rapidly increasing in popularity with the 'Nitro-Infused Cold Brew Coffee'.
- Built-In Safety; A non-adjustable, precision, relief valve in every Taprite Regulator that cannot be removed or easily circumvented.
- Fail-Safe protection: In case of regulator failure the Integral Safety will instantly activate to protect system from over pressurization
- Excess pressure is vented into atmosphere.
- Keg Security; Pressure in Keg can never exceed preset level of 55-60 psig prior to shutdown. After shutoff no additional pressure enters the system.
- Left-Hand Threads–High pressure ports (only) have left hand threads to prevent possible use as a low-pressure outlet.
- Non-removable Adjusting Screw with lock nut designed so if turned all the way in, pressure entering system stays at safe level.
- Click the part # in the list below for image, info and a closer look
- Scroll down for more Info, Specs & related items.
- 7-10 Day ETA for Out of Stock/Non-Stock Items in this Category
Products (Total Items: 7)
More About Nitrogen (N2) Zinc Bonnet Regulators
- Nitrogen is widely used in the beer industry but also has been used for dispensing wine and is rapidly increasing in popularity with the 'Nitro-Infused Cold Brew Coffee'.
- Built-In Safety; A non-adjustable, precision, relief valve in every Taprite Regulator that cannot be removed or easily circumvented.
- Fail-Safe protection: In case of regulator failure the Integral Safety will instantly activate to protect system from over pressurization
- Excess pressure is vented into atmosphere.
- Keg Security; Pressure in Keg can never exceed preset level of 55-60 psig prior to shutdown. After shutoff no additional pressure enters the system.
- Left-Hand Threads–High pressure ports (only) have left hand threads to prevent possible use as a low-pressure outlet.
- Non-removable Adjusting Screw with lock nut designed so if turned all the way in, pressure entering system stays at safe level.
- 7-10 Day ETA for Out of Stock/Non-Stock Items in this Category