Dropships and factory orders are available for nonstock items.
For more information please scroll down
Part #
5700HP SERIES
Stock
Price
Qty
Can't find the regulator that is right for you? Please call 1-800-866-6680
Model Numbers
T5740HP160BK
Body only, black cap, no fittings, (0-120 PSI) for 160 gauge
T5741PMHP
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap
T5741PMHPB
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve blue cap
T5741PMHPBK
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap
T5741PMHPBKGP
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve black cap, metal gauge guard
T5741PMHPGPS
1P X 1P, 160lb & 2000lb gauge, ¼" flare with check valve red cap, gauge boot
T5745HPBK
1P X 5P, 160lb & 2000lb gauge, (5) X ¼" flare with check valve (vertical manifold) red cap
T5752HP-02
2P x 2P, 160LB & 2000LB gauge, ¼" flare with check valve red cap
Wall Mount Regulators
T5741WMHP
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap
T5741WMHP-3
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check valve red cap, 3 foot hose with CO2 tank fitting
T5741WMHP-6
1P X 1P, 160lb & 2000lb gauge, ¼" flare inlet, ¼" flare with check red cap, 6 foot hose with CO2 tank fitting
More about 5740 CO2 Regualtors
Polycarbonate bonnet will not chip, break or fade
High CO2 volumetric flow provides continuity in product dispensing
Primary regulators connect directly to gas source
Recommended operating pressure be limited to 2/3 of the gauge range for maximum accuracy
UL approved per UL252 class IV rating for CO2
Both Primary and Secondary regulators can accept CO2 tank pressure
10 Micron filter built in to keep contaminants out of regulator
Used primarily for Soda and Beer but can be used for other applications.
One repair kit for primary and secondary
Features:
Series 5740 Primary Regulators (for direct cylinder mount) have a non-adjustable safety built into the body of the regulator where it cannot be removed or easily circumvented. In the event of a failure of the regulator seat, this safety will respond instantaneously protecting anything downstream from potentially dangerous high pressure. The maximum down stream pressure the system will see will not exceed 143 psig in accordance with NSDA guidelines.
