More About Flojet G56 BeerJet Series Pumps
Unique Balanced Diaphragm Pump
Adds life to pump
Minimizes "shocking" the Beer
Accepts Pressurized Beverages into Pump
Gas driving the pump never comes into contact with the product
Straight through flow path prevents foaming
Quick Disconnect fittings
Only Diaphragm Pump Designed specifically for Beer
Adds additional pressure to beer system without altering CO2 volumes or introducing new gases to beer.
Total Precision of Quality Control by separating CO2 needs and Flow Control into Two Independent Operations.
Eliminate Foaming Problems associated with Temperature Fluctuations and Hot Spots by compressing lines up to 70 PSI.
Maintain high pressures in long runs without experiencing “flat” beer
Ability to improve Quality Control on current systems that are using CO2 / Air mix or where several CO2 / N2 mix ratios are required.
The Flojet G56 BeerJet series pumps are designed to dispense beer at the brewer specified keg top pressure, through long or short, vertical or horizontal beer runs. The pumps are pneumatically driven by dry compressed air or bottled gas/CO2. By using the BeerJet pumps, the correct
equilibrium pressure is maintained on the keg keeping the carbonation level of the beer exactly as the brewer intended it to be served and enjoyed by the
Flojet’s BeerJet pumps are capable of pumping beer up to 240 meters
horizontal or 30 meters vertical through a single line. The pump can dispense up to five taps from a single keg and has a
service life of more than 250,000 liters.
More About Shurflo Beer Ace Pump:
Design Twin Chamber; Dual Balanced Diaphragms
Materials of Contruction Polypropylene, EPDM, Santoprene, Celcon, 316 Stainless Steel Agency Approvals FDA Sanctioned, NSF listed, SK Approved
Power Source Dry Compressed Air, CO2 or Nitrogen
Operating Pressure 20 psi. (1.4 bar) to 70 psi (4.7 bar)
Displacement 2.5 oz. (74 cc) per cycle
Temperature Limits 34 - 120 F (1.1 - 49 C)